To distinguish between the two different applications on the Diablo discs locate the information bar on the right side of the product. Diablo discs for metal applications contains a blue information bar with metal icon. Diablo discs for masonry applications contain a green information bar with a masonry icon.
Maintain a proper feed rate. Feeding too slow causes burning of the material. Feeding too fast can be dangerous and produces a poor dull cut. If you experience burning on one side of the cut you should check and adjust the saw's alignment. Consult your saw owner's manual for alignment instructions.
For best results, set your saw so that one half of a carbide tip extends above the material to be cut.
All Diablo sanding belts are bi-directional and will work in either direction.
Combination blades are designed to crosscut and rip. General Purpose blades can be used for most wood cutting applications including plywood, laminated wood and melamine.
You may find all of our product manuals by clicking here (diablotools.com/manuals)
You can contact Diablo in Australia by calling 1300 307 044 or email us at DiabloService@au.bosch.com
No. However, we recommend that you check out our Authorized Sharpening Centers list (diablotools.com/sharpening) for our certified sharpeners.
Diablo's premium manufacturing facilities for saw blades are located in Udine, Italy.
Diablo does not sell direct. Diablo sells only through authorized dealers. You may find your closest dealer on our web site (diablotools.com/dealer_locator) or by calling our customer service department at 800-334-4107 Monday through Friday 8:30 AM to 5:00 PM EST.
Diablo's 12 hole universal sanding disc will fit all 5 hole and 8 hole 5" Random Orbital Sanders. To find instructions on proper alignment to maximize your performance, please click here: www.diablotools.com/sandingdisc